410 Stainless Steel Sheet

410 Stainless Steel Sheet

410 stainless steel sheet is an all-purpose, 12%-chromium, martensitic stainless steel which can be heat treated for wide-range mechanical properties. 410 stainless steel sheet is the grade of martensitic stainless steel commonly supplied hardened where it is required for higher strength and moderate resistance to both heat and corrosion. The primary differences between 410 and 410S stainless steel are that 410 is the base, all-purpose, hardened, martensitic stainless steel, while 410 stainless steel sheet is the lower-carbon modified version of 410 stainless steel, which is easier to weld, but has lower mechanical properties.

410 stainless steel sheet is a hardenable, direct-chromium alloyed stainless steel, combining superior wear-resistance from higher Carbon alloys with excellent corrosion-resistance from Chromium-based stainless steels.

What is 410 Stainless Steel Sheet

410 stainless steel sheet is a martensitic stainless steel that provides good corrosion resistance plus high strength and hardness. It is magnetic in both the annealed and hardened conditions. A wide variety of applications use 410 stainless steel, including food handling equipment, surgical instruments, and steam turbine parts.

410 Stainless Steel Sheet Specifications

Material	Stainless Steel
Standard	ASME, ASTM, EN, BS, GB, DIN, JIS, etc
Steel Grade	200 Series: 201,202 300 Series: 301,304,304L,316,316L,316Ti,309,310,317,321 400 Series: 409,410,420,430,436,444,441,440c Duplex Steel: 904L,2205,2507,2101,2520,2304
Thickness	Thin Sheet: 0.1mm-3mm Thick Plate: 3mm-16mm Extra Thick Plate: 16mm-115mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm
Length	2000mm, 2438mm, 3000mm, 3500mm, 4000mm, 6000mm
Manufacturing Method	Cold Rolled, Hot Rolled
Edges	Mill Edges, Silt Edges
Surface	No.1, 2D, 2B, BA, 8K, No.4, Hairline, Sandblasting
Surface Treatment	Corrugated, Perforated, Embossed, Etched, Water Rippled
Color	Golden, Champagne gold, Rose gold, Brown, Bronze, Brass, Black, etc.

410 Stainless Steel Sheet Specifications

Name	410 stainless steel sheet
Grade	201, 202, 304, 316, 316L, 410S, 430 etc.
Technique	Hot Rolled Cold Rolled
Standard	JIS, AISI, ASTM, DIN, TUV, BV, SUS, etc
Thickness	0.22 – 3mm
Width range	20mm – 1500mm
Length	Customized
Finish	2B, BA, No.4, 8k, Brushed,Hairline,PVD Coating,Sandblasted
Color	Golden, Black , Sapphire Blue, Brown, Rose gold, Bronze, Purple, gray, silver, Champagne, violet, blue diamond, etc
Sample	Available
Application	Interior/exterior/architectural/bathroom decoration, elevator decoration, hotel decoration, kitchen equipment, ceiling, cabinet
Application	kitchen sink, advertising nameplate

Item	Stainless Steel 410 sheet(Hot rolled, cold rolled)
Thickness	0.01~200mm
Width	1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm, etc
Length	2000mm, 2440mm, 3000mm, 5800mm, 6000mm, etc
Standard	JIS, AISI, ASTM, GB, DIN, EN, etc
Surface	the surface and finish of stainless steel 410 sheet: 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc
Brand:	Indian Origin, European Origin, Japanese Origin, US Origin, Korea Origin, Thailand Origin, Taiwan Origin
Manufacturer:	POSCO, Aperam, Jindal Stainless, DKC Korea, Thyssenkrup, Baosteel, TISCO, Arcelor Mittal, VDM, Nippon Metal, Outokumpu
Package	Shrink-wrapped ,Carton boxes,Wooden pallets,Wooden boxes ,Wooden crates Etc. required.
Export to	India, Indonesia, Malaysia, Singapore, Saudi Arabia, Qatar, UAE, Iran, Iraq, Oman, South Africa, Nigeria, Kenya, Italy, UK, Brazil, Russia , Egypt , Kuwait , Taiwan, Australia .

Is 410 stainless steel any good?

Yes, 410 stainless steel sheet is good for many applications. It is heat resistant and can be used in many different environments.

Is 304 or 410 stainless steel better?

There are many grades of stainless steel, but two of the most common are 304 and 410. So, which is better?

The answer lies in the application. 304 stainless steel is better for forming and welding, while 410 stainless steel is better for heat treating. In terms of corrosion resistance, 304 stainless steel is generally more resistant to oxidation and degradation than 410 stainless steel.

However, 410 stainless steel sheet is more heat resistant than 304 stainless steel. So, if you need a material that can withstand high temperatures, 410 stainless steel is a good choice.

To sum it up, each grade of stainless steel has its own set of properties that make it ideal for certain applications. When choosing a grade of stainless steel, consider the properties that are important for your application.

Equivalent of 410 stainless steel sheet

Alloy 410 is the basic, general purpose martensitic stainless steel that is used for highly stressed parts and provides good corrosion resistance plus high strength and hardness. Alloyd 410 contains a minimum of 11.5% chromium which is just sufficient enough to demonstrate corrosion resistance properties in mild atmospheres, steam, and many mild chemical environments. It has better scaling resistance than 410 grades with higher chromium contents. Additionally, Standard alloys like 304 and 316 have better forming properties than Alloy410. Martensitic stainless steels are low carbon steels built around the Type 403 chemistry with additions of sulphur (S) and sometimes selenium (Se). They are magnetic and heat treatable. Each alloy offers different advantages to fabricators who may choose them based on their unique characteristics such as weldability or formability:

410 stainless steel sheet (UNS S41000) is a 12% chromium martensitic stainless steel plate that can be heat treated to obtain a wide range of mechanical properties. The alloy has good corrosion resistance along with high strength and hardness. In the annealed condition, it exhibits good formability, ductility, and weldability. Martensitic stainless steels were designed to be hardenable by heat treatment and also corrosion resistant in some cases.

Is 316 or 410 stainless steel better?

There are several grades of stainless steel, but only two common types that are used in the foodservice industry: 316 and 410. So, which one is better?

316 Stainless Steel

316 stainless steel is an alloy made up of chromium, nickel, and molybdenum. It has excellent corrosion resistance properties against aggressive chemicals and salt water, making it ideal for food prep areas that are exposed to these elements. Additionally, 316 SS has a higher heat tolerance than other grades of stainless steel, so it can withstand high temperatures without warping or becoming misshapen.

410 Stainless Steel

410 stainless steel sheet is another chromium-based alloy, but it contains less nickel than 316 SS. As a result, 410 stainless steel sheet isn’t as resistant to corrosion and isn’t recommended for use in environments where there is a risk of exposure to aggressive chemicals or salt water. However, 410 stainless steel sheet does have a higher heat tolerance than 304 SS (the most common grade of stainless steel), so it can be used in applications where high temperatures are a concern.

So, which type of stainless steel is better? That depends on your needs. If you’re looking for the best possible corrosion resistance, go with 316 SS. But if you need a grade of stainless steel that can withstand high temperatures without warping or becoming misshapen, 410 stainless steel sheet is the better choice.

How strong is 410 stainless?

410 stainless steel sheet is a martensitic stainless steel that is used in a wide variety of applications. The strength of 410 stainless steel is similar to that of other martensitic steels, such as 420 stainless steel, but it has a lower carbon content. This makes 410 stainless steel sheet an ideal choice for applications where strength is a concern but corrosion resistance is not.

The remaining helps to keep cracks away from your materials if you are welding them together or when they are exposed to higher temperatures. The malleability of martensitic alloys is limited because of its hardness.

It has good impact, corrosion, and abrasion resistance to 1,200F (649C). This grade of stainless steel plate has exceptional characteristics like high strength, durability, good machinability, and corrosion resistance, with good mechanical and chemical properties. This grade 410 stainless sheet is used in large numbers of applications across different industries.

Feel free to contact Atlantic Stainless today to get pricing for any custom sizes you need. All values listed are approximate minimums, unless specified. Type Strength Yield 0.2% Offset (KSI) Strength to break (2-gauge) % stretch (2-gauge) 410 Annes 30 min.

Is 410 stainless magnetic?

Yes, 410 stainless steel sheet is magnetic. However, it is not as magnetic as other types of stainless steel, such as 304 or 316. This is because the 410 alloy contains less chromium and nickel than the other two.

Does 410 stainless steel rust?

410 stainless steel sheet is an alloy that contains 11% chromium. This alloy is highly corrosion resistant and does not rust easily. However, 410 stainless steel will rust if it is exposed to oxygen for an extended period of time or if it is placed in a high humidity environment.

If you need a steel with moderate corrosion resistance and strong mechanical properties, then 410 is an ideal grade to choose. Type 410 has a good corrosion resistance in weathering, in potable water, and in mildly corrosive chemical environments due to Type 410s ability to form a strongly adhering oxide film which protects its surfaces against further attacks. For the best strength, toughness, and corrosion resistance, slowly heat the alloys to 1,800degF (982degC) and quench at ambient temperatures in petroleum.

Why won't my magnets stick to stainless steel?

There are a few reasons why your magnets might not be sticking to your stainless steel sheet. The first reason could be that the stainless steel sheet has a low carbon content. Magnets are attracted to materials that have a high iron content, so a low carbon content in the stainless steel sheet will make it less attractive to magnets. Another reason could be that the stainless steel sheet has been treated with a process called annealing. This process makes the material more resistant to corrosion and makes it less likely for the magnet to stick. Finally, the thickness of the stainless steel sheet could also be a factor. If the sheet is too thin, the magnets might not have enough material to grip onto.

Can you weld 410 stainless steel?

Welding 410 stainless steel is possible but it is not recommended because of the potential for cracking. The high carbon content of 410 stainless steel makes it prone to cracking when exposed to high temperatures. welding with a lower carbon stainless steel, such as 304, is a better choice for welding 410 stainless steel.

Can you heat treat 410 stainless steel?

410 stainless steel can be heat treated to achieve high strength and hardness. The highest temperatures that can be reached with this alloy are around 1200 degrees Fahrenheit. This allows the steel to be used in applications where high temperatures are a concern, such as in aerospace and power generation. 410 stainless steel can also be tempered to increase its ductility and toughness.

Is 410 stainless steel safe for cooking?

410 stainless steel is a martensitic stainless steel that contains 11.5% chromium. This composition makes it magnetic, which is why it’s often used in electrical applications. Its high carbon content (0.15%) also makes it brittle and not heat-treatable. However, its corrosion resistance is fairly good thanks to the chromium content.

Cooking with 410 stainless steel is safe as long as you use it correctly. Always preheat your pan before adding food, and make sure to use cooking oil or butter to prevent sticking. Use wooden or silicone utensils instead of metal ones to avoid scratching the surface. Finally, don’t forget to season your pan regularly to keep it looking and performing its best!

Why welding of stainless steel is difficult?

Welding stainless steel is difficult because it is a highly heat-sensitive metal. If the metal is heated too much, it can become brittle and break. Also, stainless steel has a high melting point, so it is difficult to weld without using special equipment.

Leave Us A Message

Send your inquiry today

Lyn Steel, established in 2011, is a leading manufacturer and supplier of diverse steel products in China. Our main products include hot/cold rolled steel, galvanized steel, galvalume steel, and so on.

Get in Touch

Hot Products

Information

Copyright © 2022 China Stainless Steel Coil Manufacture | Powered by LYN

English